manualshive.com logo in svg

Topcon Net-G5, Руководство оператора

Поделиться
Скачать
Topcon Net-G5 Скачать руководство пользователя страница 46

Receiver Problems  

 38 

P/N: 1004636-01

T

roubles

hoot

ing

Receiver Problems

The following are some of the most commonly encountered receiver problems. 

The receiver cannot establish a connection to a computer or external controller 
Cable specific problems:

•

The cable is not properly plugged in.

– Unplug the cable, then securely and properly reconnect it to the receiver.

•

The cable is damaged.

– Use an undamaged cable. Contact a dealer to replace the cable.

•

The USB driver is not installed.

– If you are using a USB cable connection, make sure the USB driver, included on the Software CD, is 

installed on the computer. You can also download the driver from the Topcon support Website at 

www.topconcare.com.

Generic problems:

•

The receiver port used for connection is not in Command mode.

a. Connect the receiver to a computer and open TRU (see the 

Topcon Receiver Utility 

(

TRU) Online 

Help

).

b. Click Receiver Settings

Ports.

c. Change the Input Mode for the port used for connection to cmd.

•

You can also use the Vanguard web interface to place the unit in Command mode.

The receiver does not lock on to satellites for a long period of time 

•

The corresponding receiver options may be disabled or expired (L1/L2, GPS/GLONASS must be on to track 

satellites).

– Order a new OAF with the desired options activated to enable or extend validity of the corresponding 

receiver options. Contact a dealer or visit the Topcon website for details.

– Refer to the 

Topcon Receiver Utility 

(

TRU) Online Help 

for a

 

detailed description of options.

The receiver tracks too few satellites 

•

The survey is conducted near obstructions (tree canopy, tall buildings, and so forth).

– Make sure the Multipath Reduction boxes have been enabled.

a. Connect the receiver to a computer and open TRU (see the 

Topcon Receiver Utility 

(

TRU) Online 

Help

).

b. In TRU, connect to the receiver.
c. On the TRU main window, choose Receiver Settings

Tracking

Adv tab. Make sure the C/A 

code multipath reduction check box is selected.

•

Move to an area free of obstructions, if applicable.

Содержание Net-G5






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды