manualshive.com logo in svg

Topcon Net-G5, Руководство оператора

Поделиться
Скачать
Topcon Net-G5 Скачать руководство пользователя страница 20

Receiver Status LEDs  

 12 

P/N: 1004636-01

Di
spl

a

y P

a

nel

Cellular Status

1

Battery LED

The Battery LED indicates the remaining charge of the internal batteries. When an external power source is 

utilized, the LED turns green and begins to blink if the batteries begin to charge. See Table 11 for more 

information. 

Power LED

1. Cellular modem functionality will be added in a later version of firmware.

Table 10. Cellular LED Patterns

LED Color

Description

The cellular modem is starting up.

The cellular modem is transmitting or receiving data.

Table

 

11.

 

Battery LED Patterns

LED Color

Description

THE RECEIVER IS ON; INTERNAL BATTERIES IN USE

The charge is greater than 50 percent.

The charge is greater than 10 percent.

The charge is less than 10 percent.

THE RECEIVER IS ON; EXTERNAL POWER IN USE; PWR LED IS SOLID GREEN

An external power source is in use, and the internal batteries are fully charged.

The internal batteries are at greater than 50% capacity; the batteries are being 
charged.
The internal batteries are at greater than 15% capacity; the batteries are being 
charged.
The internal batteries are at less than 15% capacity; the batteries are being charged.

THE RECEIVER IS OFF

The receiver is connected to an external power source, and the batteries are fully 
charged.
The receiver is connected to an external power source, and the batteries are being 
charged.

Table

 

12.

 

Power LED Patterns

LED Color

Description

An external power source is in use and connected to the PWR1 bulkhead. The LED 
blinks green at 1 Hz intervals.
An external power source is in use and connected to the PWR2 bulkhead. The LED 
blinks green at 2 Hz intervals.
An external power source is in use and connected to the PWR1 and PWR 2 bulkheads.

LED is dark when no external power source is connected.

Содержание Net-G5






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды