Topcon HiPer V, Руководство оператора

Страница: 70 / 122

Collecting Data
Recording Data
57 P/N: 1001608 ‐ 01
Recording Data
You can log raw GNSS data to the receiver’s memory card and use the Topcon Receiver Utility (TRU) or MAGNET Office™ software
to download the files to a computer.
To start or stop recording data to the receiver, you can use the LED display panel or TRU.
1. Press the Power button to turn on the receiver.
2. Wait for the STAT LED to indicate satellites are being tracked. The STAT LED blinks green for GPS satellites and amber
for
GLONASS satellites. A short red blink indicates the receiver has not solved a position. Five or more satellites
provide optimal positioning.
3. Press the POWER button three times within two seconds to begin recording. You can also select File
Explorer  Logs  Start in TRU to begin recording data.
4. Make sure the REC light is blinking green. This indicates that a file has opened and data collection has started. The
REC LED blinks each time data is saved to memory.
5. When you have finished recording, press the POWER button three times, and make sure the REC LED is dark. You can
also select File Explorer  Logs  Stop in TRU to end data recording.
6. To turn off the receiver, press and hold the POWER button for 3 to 10 seconds until all LEDs turn dark and the BAT
LED is solid red.
You can also log data using MAGNET Field software.