13
Battery Charging
1
After installing the battery, plug the connector
of AC/DC converter in the FC-120.
2
Plug the AC/DC converter in an outlet. Then
the charge LED will light.
Charging is completed after approximately
6 hours.
The display can be turned on or off by the
power key.
The charge LED of FC-120 will indicate
charging status;
Red ON
: Charging.
Green ON
: Charging completed.
Red Flashing : Charging error.
Note:The instrument may develop heat while charging, there is no problem of it.
Always use the AC/DC converter provided with the product.
Charge LED
Connector
AC/DC converter
Содержание FC-120 Series
Страница 1: ...FC 120 ESC Alt INSTRUCTION MANUAL DATA COLLECTOR FC 120 64855 90012 SERIES FC 120...
Страница 2: ......
Страница 33: ...2008 TOPCON CORPORATION ALL RIGHTS RESERVED...