Topcon DL-103 Series, Инструкция по эксплуатации

Страница: 23 / 35

21
RS-232C
1
While pressing the [D/R] key, press the power switch to set the indi-
cator set mode.
2
Press the [HDif] key to change the indicator “RS-232C”.
3
Press the [D/R] key. The position of the cursor indicates setting con-
dition then.
4
Press the [HDif] key to select “ON”.
5
Press the [D/R] key to settle the term.
6
Turn the power switch off.
Data Format
Result of measurement can be transferred to PC from DL-103AF.
To transfer the Rod and Distance data, DL-103AF should be set RS-
232C on and the measurement mode (Rod / Distance).
Character format is fixed.(except termination code)
For more information about connecting with the instrument, refer to
DL-103 interface manual .
Baud rate 1200BPS
Start bit 1bit (“0”=high)
Data bit 7bit (“0”=high, “1”=low)
Parity even number (“0”=high, “1”=low)
Stop bit 1bit (“1”=low)
Termination code ETX / ETXCRLF