Topcon DL-103 Series, Инструкция по эксплуатации

Страница: 11 / 35

9
PREPARATION FOR MEASUREMENT
Using the Battery Box
How to remove the Battery Box
Push down the lock lever to remove the bttery.
How to install the Battery
Install four AA dry batteries in the battery box referring to illustration of
plus and minus.
How to install the Battery Box
Place the base of the battery box into the main body, push the battery
box toward the instrument side till the battery clicks into position.
Setting Up the Instrument for Measurement
Setting up the Tripod
Use a tripod with a tripod screw of 5/8" diameter and 11 threads per inch.
1
Extend the legs to a suitable length and tighten the wing nuts at the
legs mid-sections.
2
Tighten the hexagonal nut located on the side of the tripod head
such that the tripod legs are not too loose. Place the tripod over the
required point, with the legs spread about a meter apart or at such
an angle to insure the stability of the tripod. Place one tripod leg in
position and then used the other two legs to approximately level the
tripod head. If necessary adjust the tripod leg extension.
3
Press the shoes of the tripod legs firmly into the ground to anchor the
tripod securely.
Lock Lever
Battery box