47
3.6 Correction Factor
The number of the currently set correction factor is displayed.
Display Method
☞
「
3.1.2 Data/Setting Item Display
」
The correction factor is a factor for correcting the measurement value by using it to multiply the
measurement value.
The procedure for changing the factor is as described below.
1
Press the [CHANGE] button.
The following screen is displayed.
2
Press the [ROTATION] button, and select the process to be performed (indicated by "*").
DISP&SET
: Selected when checking the value of the registered correction factors
(K01 to K10), or when setting the number of the correction factor to be
used.
☞
「
3.6.1 Checking/Setting the Correction Factor
」
INPUT
: Selected when entering or changing the correction factor.
☞
「
3.6.2 Inputting the Correction Factor
」
CLEAR
: Selected when clearing the correction factor.
☞
「
3.6.3 Clearing the Correction Factor
」
OFF
: Selected when not using a correction factor.
BACK
: Selected when returning to the previous screen.
3
Press the [ENTER] button.
The screen corresponding to the selected process is displayed.
・
The correction factor is not valid when dip switch 5 is set to the FACTOR B side.
・
The factory settings for KX, KY, and KZ are all 1.
＊
ＦＡＣＴＯＲ
ＮＵＭＢＥＲ
＊
ＳＥＴ
ＦＡＣＴＯＲ
０１
Memo
ＦＡＣＴＯＲ
ＤＩＳＰ＆ＳＥＴ
ＯＦＦ
ＩＮＰＵＴ
*
ＢＡＣＫ
ＣＬＥＡＲ
