Topcon BM-7AC, Инструкция по эксплуатации

Страница: 45 / 91

3. Various Settings
43
3.1.2 Data/Setting Item Display
After moving to the function mode, each time the [ENTER] button is pressed, the type of
data/setting items changes. Press the [ENTER] button until the data/setting item to be
checked or changed is displayed.
The displayed data/setting items are as shown below.
・ The Standard sample and white board are not displayed when measurement of them are not
performed.
When measuring light source color - Dip switch 3 is on the SOURCE side -
・ Standard sample
☞
「 3.2 Standard sample 」
・ Correction Factor
☞
「 3.6 Correction Factor 」
・ Area Correction Factor
☞
「 3.7 Area Correction Factor 」
・ Measurement Range
☞
「 3.8 Measurement Range 」
・ RS-232C Parameter
☞
「 3.9 RS-232C Parameter 」
・ Buzzer Sound
☞
「 3.10 Buzzer Sound 」
・ Communication Format
☞
「 3.11 Communication Format 」
・ Average Measure
☞
「 3.12 Average Measure 」
・ Maintenance Recommended Display
☞
「 3.13 Maintenance Recommended Display 」
When measuring object color - Dip switch 3 is on the OBJECT side -
・ Standard sample
☞
「 3.2 Standard sample 」
・ White board
☞
「 3.3 White Board 」
・ White Board Luminance Factor
☞
「 3.4 White Board Luminance Factor 」
・ White Board Correction Factor
☞
「 3.5 White Board Correction Factor 」
・ Correction Factor
☞
「 3.6 Correction Factor 」
・ Measurement Range
☞
「 3.8 Measurement Range 」
・ RS-232C Parameter
☞
「 3.9 RS-232C Parameter 」
・ Buzzer Sound
☞
「 3.10 Buzzer Sound 」
・ Communication Format
☞
「 3.11 Communication Format 」
・ Average Measure
☞
「 3.12 Average Measure 」
・ Maintenance Recommended Display
☞
「 3.13 Maintenance Recommended Display 」
Memo