Topcon BM-100 Series, Инструкция по эксплуатации, Страница: 15 / 60

13
■
Names and functions of keyboard
The function of each switch is as follows:
Switch Description
[AUTO/MANU.]
Auto/Manual Switch for selection between [AUTO] and [MANU].
[AUTO]: Optimum measurement range is automatically selected
according to illuminance level.
[MANU.]: Measurement range is manually set.
Display range
☞
‘2.2 Auto-range measurement and display range’
[MANU. RANGE]
Manual Range Changes the measurement range to the next manually.
Measurement range are switched in turn as follows;
1→2→3→4
Display range
☞
‘2.3 Manual-range measurement and display range’
[C.C.F.]
Color Correction
Factor Sets and confirms the value of the Color correction factor.
The BM-100 can memorize one correction factor data.
[#]
Sharp Stops readouts on the display. (Luminance mode)
[%] Unused.
[
⊿
] Unused.
[CALL] Unused.
[CAL ] Shifts to standby status of pre-measurement for user-specified material
calibration in phosphorescence luminance prediction mode.
[
●
] Sets decimal point when entering the Color correction factor.
[0 - 9] Increments the numerical value in inputting Color correction factor.
[SHIFT] Moves the cursor in Color Correction factor setting.
Shifts to the selection of phosphorescent material setting menu.
Selects the phosphorescent material.
Selects the elapsed time from 20 min, 60 min, and 90 min in
Phosphorescence luminance prediction mode.
[SET] Confirms your entry in color correction factor setting, and confirm your
selection of the phosphorescent material.
MANUAL RANGE switch
0
～
9 switch
SET switch
C.C.F. switch
Decimal point
switch
⊿
switch
SHIFT switch
AUTO / MANUAL
switch
％
switch
＃
switch
CALL switch
CAL switch