Topcon ALADDIN Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 147

Topcon ALADDIN Скачать руководство пользователя страница 19

ALADDIN

- User manual

Rev. 23 of 08/07/2016

19

6.2

Electrical safety



To avoid risk of electric shock, this device must be connected to supply mains with protective

earth.



ALADDIN has an on-board power supply unit installed. For connection to the mains, use only the
manufacturer-approved cables provided with the device.



Before performing maintenance on the device, turn it off and disconnect the power cable.



Do not touch the LAB/USB ports contacts and the patient at the same time.

6.3

LED emission safety

The light emitted from this instrument is not potentially hazardous.

ALADDIN has a series of LEDs of various types and powers installed. All the characteristics are detailed in the
Technical Specifications section in this manual.
The LED groups comply with the emission limits for the Group 1 instruments of the standard UNI EN ISO
15004-2.

All sources are classifiable as EXEMPT GROUP according to EN 62471.

6.4

Installation with external devices or IT Network

ALADDIN complies with the CE marking requirements.



Before connecting an external device, such as a computer, printer, monitor, keyboard, mouse or

other devices, make sure that they comply with the EN 60950-1 standard and have the CE marking.



When ALADDIN is installed in rooms for medical use, the PC and the connected printer must be powered
by means of an IEC 60601-1 compliant insulating transformer.



If ALADDIN is installed in rooms for medical use without a computer, it is not necessary to use an
insulating transformer.



Do not use mobile phones or other devices not compliant with the requirements of class B EMC close to
ALADDIN.



Every external device that has to be connected to ALADDIN must have a connection cable (USB or

LAN) with a maximum length of 3 m.

The purpose of ALADDIN connection to an IT network is report printing and remote technical assistance.



The ALADDIN USB port must be connected to printer with USB or LAN interface. Ask Topcon technical
assistance for printer driver installation.



The ALADDIN can be connected to a Local Area Network (LAN) through the LAN connector. The network
must have Ethernet protocol (IEEE 802.3). Ask Topcon technical assistance and the system administrator
for ALADDIN and network settings.



The purpose of ALADDIN connection is saving PDF report on an external network folder or technical
service intervention on the machine.



Connection of ALADDIN to a computer network that includes other equipment could result in previously
unidentified RISKS; identify, analyze, and control such RISKS (refer to IEC 60601-1:2005).



Subsequent changes to a computer network could introduce new RISKS and require new analysis.

«
...
17
18
19
20
21
...
»

Содержание ALADDIN




















































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды