Topcon 3D-MC2, Инструкция по установке и калибровке

Страница: 26 / 32

3D-MC² Setup and Calibration
3D-MC² Installation and Calibration Manual
4-12
3. Press
Blade slope Set
on the
Adjust Slope
screen, and enter the
measured slope value. Press
Set
again to save the value.
Figure 4-15. Set Blade Slope
4. Rotate the blade in the opposite direction and verify that the smart
level value matches.
Figure 4-16. Measure Opposite Blade Slope
Blade
Level