Topcon 3D-MC2, Инструкция по установке и калибровке, Страница: 22 / 32

3D-MC² Setup and Calibration
3D-MC² Installation and Calibration Manual
4-8
5. Select the GPS precisions for measuring static points
(Figure 4-9). Press
Next
.
Figure 4-9. GPS Precisions Screen
6. Select
UDP/IP
as the
Connection
type from the drop down menu
in the GPS Comms Configuration screen as shown in Figure 4-
10 on page 4-8. Your MC-R3 controller must have the G3 3D-
MC² symbol, as shown on the GPS Comms Configuration
Screen, to be compatible with the MC² Sensor. Press
Next
.
Low Precisions...