Topaz Systems T-LBK43LC, Руководство по монтажу

Страница: 9 / 9

9
www.topazsystems.com
Back to Top
Tilt Stand Mounting Guide (T-LBK43LC)
Surface Mounting Instructions
1) Using a 3/16-in drill bit (not included), drill holes into the surface on which you want to
mount the tilt stand (see diagram below).
2) Remove the four rubber feet from the bottom of the tilt stand. The rubber feet are
attached to the tilt stand with a light adhesive, so use a thin item to pry them off.
3) Use the long panhead screws, small nuts, and small split washers (see Page 3 for
pictures) from the included hardware kit to attach the tilt stand to the surface, placing
the small split washers in between the surface and the small nuts.