Topaz Systems T-LBK43LC, Руководство по монтажу

Страница: 6 / 9

6
www.topazsystems.com
Back to Top
Tilt Stand Mounting Guide (T-LBK43LC)
5) Lay the signature pad on the top of the tilt stand as it would be if in use. Then, flip both
the signature pad and tilt stand over, resting it on a flat surface so you are looking at the
bottom of the tilt stand.
6) Physically turn the bottom of tilt stand 180 degrees so it is vertical instead of horizontal.
This will provide easier access to the screw holes using a screw driver (see Steps 7 and
8 on Pages 7 and 8).
Top of signature pad
Top of signature pad