TOP VEHICLE TECH GR3FORD5, Руководство по установке

Страница: 3 / 8

3
www.topvehicletech.com
FITTING GUIDE
1. Using a set of radio release keys, push them into the 4x ports found at each corner of the main radio.
1. Open the passenger side door and proceed to pull away the door trim from the pillar.
STEREO REMOVAL
DAB ANTENNA INSTALLATION
2. Using a set of panel removal tools, begin to pry away the pillar casing.
4. The DAB antenna not only has a self adhesive backing, but also features a black earth sheet. When
placing the DAB antenna, the earth sheet
MUST
be placed onto the metal part of the pillar. The antenna
itself must be located roughly 15cm from the top of the windscreen.
Note: this antenna must not be placed atop any kind of heating elements, this will interfere with the
antenna’s signal.
5. Once happy with the placement, take the 3m of wiring extension and feed it down through to the
stereo’s opening. With the wiring adjusted to the appropriate length, feel free to re-install the glovebox.
3. The glovebox will need to be made accessible to route the antennas wiring. To do this you will need to
open the glovebox and remove 4x screws atop the main lip as well as 3x screws that are hidden behind
plastic clips. Then all that is needed is to pull the main housing out.
2. Once done, simply pull the radio out of the dashboard and disconnect all of the wiring.
FASCIA PLATE SET-UP
1. Attach the metal clips that come with the kit onto the back of the new fascia.
3. With the cage secured into place, and once the “ Stereo Installation ” process is complete, simply slide
the stereo into the fascia.
2. Once the clips are attached, simply push the new fascia into the dashboard.