background image

2

www.topvehicletech.com

ABOUT THIS PRODUCT

The 

GR3FORD5

 installation kit allows for the retention of the vehicle’s steering wheel controls and maintains 

the original aesthetic of the interior when installing a new car stereo. The 

GR3FORD5 

gives you everything you 

need for a complete install in one box. The components of this kit are compatible for the Ford Mondeo (MK3, 
2004-2007) with square shaped 5000C, 6000CD & 6006CD stereos. The wiring harness and interface will help to 
retain the steering wheel controls with the new stereo. Supplied with a Quadlock connector.

NB: the fascia in this installation kit is only compatible with square shaped OEM units.

CUSTOMER SUPPORT

Installations should be carried out by, or under the guidance of an experienced installer. If you do encounter any 
problems during the installation of this product, then please contact our dedicated customer service team at: 

Phone:

 

01420 470 605

   

 E-Mail:

 

[email protected]

CONTENTS

• 1x Fascia plate (with accessories)
• 1x Instruction manual
• 1x Steering wheel control harness and interface 
• 1x Antenna adapter
• 1x DAB antenna adapter
• 1x Stereo patch lead

Содержание GR3FORD5









Отзывы: