Top Gun 205 LCD, Руководство пользователя

Страница: 19 / 26

15
4. Once the wire comes out past the end of the torch neck, pull the torch trigger or press any button on the
display to stop the automatic wire feed.
5. Close the wire feed cover door
6. Replace the welding tip (25) and conical nozzle (24) back onto the torch neck and trim off any excess wire
You are now ready to weld!
MMA/STICK mode operation
Note - MMA/Stick Welding requires an MMA lead set
.
1. Connect Earth Lead Quick Connector (23) to the negative (-) output welding terminal (7).
2. Connect Earth Clamp (22) to the work piece. Contact with workpiece must be strong contact with
clean, bare
metal, with no corrosion, paint or scale at the contact point
3.` Connect the ARC/electrode holder lead (optional) to the positive (+) welding output terminal
Note – some welding electrode types utilize different connection polarity. If in doubt, contact the electrode
manufacturer
4. Turn the machine on at the Mains Power Switch (10).
5. Press the Left button (2) to mode secretion, and select the mode by Left knob (1), and press the Left knob (1)
to confirm the MMA selection.
6. When welding the display will change to show actual welding volts and amperage.
7. VRD: VRD stands for Voltage Reduction Device. The open circuit voltage at the output terminals of an MMA
welding power source is high enough to potentially cause an electric shock to a person if they come into
contact with the live terminals. VRD is a safety system that reduces this open circuit voltage to a level
where the risk of electric shock is minimized. It does, however, make striking of the arc more difficult.
Lift TIG operation
Note - TIG operation requires an argon gas supply, TIG torch, consumables and gas regulator. These accessories are
not included standard with the MIG-GS/GD; contact your supplier for further details.
1. Connect Earth Lead Quick Connector (23) to the positive (+) output welding terminal (6).
The screen will show the preset MMA welding current. This can be adjusted by rotating the Welding
Parameter Adjustment Knob (3).