Top Gun 205 LCD, Руководство пользователя

Страница: 11 / 26

7
Make sure that the supply voltage matches the voltage requirements indicated. (15% deviation is allowed)
If you increase the length of the leads, be aware that possible damage may occur with excessively long leads.
-Ground the unit with a minimum of 6mm²(10 gauge) wire to the earth ground as the drawing.
-Connect the earth lead connector to the negative (-) quick-connection terminal, and turn clockwise to tighten.
-Connect the electrode clamp holder to the positive (+) quick-connection terminal and turn clockwise to tighten.
Installation
AND OPERATION
CAUTION: Make sure the above connection for direct polarity welding; for inverse/reverse polarity , invert the connection: earth lead
CONNECTOR to the quick-connection positive (+) terminal and the electrode holder clamp connector to the negative (-) terminal.
6
8
5
2
1
4
3
7
1 Left Knob/Welding Mode Selection Knob
2 Left Button/Home Button
3 Right Knob/ Parameter Adjust Knob
5 MIG Torch “Euro Style” Connection Socket
6 Positive (+) Welding Output Terminal
7 Negative (-) Welding Output Terminal
8 Polar Conversion Line
4 Right Button/Parameter Adjust Button
Wire Speed/Diameter/Inductance/2T/4T/HOT
START/ARC FORCE
9
Rating Label
10 Power Switch
11 Welding Gas Inlet
12 Power Cable
9
11
12
10