
Top Global USA. ----MB6000 User Guide
- 42 -
3.4.3.2 DHCP
DHCP Configuration
This setting is used to configure MB6000‟s Dynamic Host Configuration Protocol
(DHCP) server function. MB6000 can be used as a DHCP server for the internal LAN
network. The DHCP server automatically assigns an IP address to each computer in
the LAN network. If you choose to enable MB6000‟s DHCP server option, you must
configure all of PCs in the LAN network to connect to this DHCP server (MB6000),
and make sure there is no other DHCP server on your network.
DHCP is enabled by factory default. If there is already a DHCP server in the LAN
network or a DHCP server is not necessary for the LAN network, the
Enable DHCP
Server on LAN Interface
can be un-checked. (Other DHCP features will be
disabled).