Top Global USA. ----MB6000 User Guide
- 20 -
Each time when the user modifies the username and password, the system
will request the user to re-authenticate the new user name and password.
Enable SNMP:
It let the administrator can manage the MB6000 through the SNMP
protocol. At the same time, you must specify the
Read-Only communicate Name
and
Read-Write communicate Name,
which enable the SNMP Manager to access
MB6000 safely.
Also, MB6000 supports to send trap information to a
remote trap
server to report the status of devices. Enable this function, you must specify the IP
address of
Trap server
and
Trap interval
, which indicates
the frequency of the
device for sending trap information to the server.
Enable RCM
：
It makes MB6000 to be managed through RCM. At the same time. You
must specify the RCM
„s IP address or hostname and the domain to register. You can
get this information from RCM administrator.
3.4.1.2 Time
Figure
3-8
Time
Time zone:
Current country time zone. You should check
Enable Daylight Saving
Time
if implement DST(Daylight Save Time) in your country.
Time setting
: You can enable/disable synchronize local time with Internet time
server by checking
Automatically synchronize with Internet time server
. The
