Top Dawg Electronics TDEE1440CAM, Руководство пользователя

Страница: 7 / 8

4.3 Clean windshield first before you install mount on windshield.
4.4 Mount Dash camera to car wind shield with Dash camera bracket.
Insert car charger to cigarette light.
4.5 Connect car charger power cord to dash camera power sockets, either on mount
itself or on side of camera power socket. It is based on your preference.
Note: Cable can extend along the edge of the car windshield to hide.
4.6 Adjust lens position, make sure the lens has the same level as ground.
4.7 Start engine to power dash camera if CLA does not have constant power.
Dash Camera will automatically start.
Note: If the Dash camera is installed correctly, red dot indicator light will be flashing
on top left corner of dash camera screen.
4.Specification
Chip set Novatek NT96655
Display 2.0 inch, 960x240
Video Resolution 2560x1440P 30fps /1920x1080P 30fps
Video format MOV
Picture Resolution 12 million pixels CMOS
Picture format JPG
Storage card type SD card, includes 32GB microSD
Storage card capacity Up to 256GB
USB Interface USB2.0
Power code USB2.0 DC5V 1A
Frequency 50HZ/60HZ
Battery 200mAh 3.7V polymer battery
Working Current 300mA
Mic/Speaker Support
Languages English / German / French / Spanish / Portuguese
/Simplified Chinese /Traditional Chinese / Japanese /
Russian
Note: The specification may different due to update software or other changes