Top Dawg Electronics TDEE1440CAM, Руководство пользователя

Страница: 3 / 8

1440P Initial Setup Instructions
•
It is recommended that you FORMART SD card.
•
Press bottom left “OK” button, make sure camera is not recording.
•
Once camera is not, press top left, menu button
•
On menu screen, using middle down arrow button, press 2x or until you
highlight
“Menu”
•
Press bottom left “OK” button - press middle top left arrow button to highlight
“FORMAT” . Press Ok- Press down arrow to highlight “Yes”, Press bottom left
“Ok” button. SD card is now formatted. If you format SD card in the future, it
will erase everything that is currently on card.
•
We recommend formatting card once a month.
Setup instructions to keep dash camera from freezing:
•
Press bottom left “OK” button, make sure camera is not recording.
•
Once camera is not recording, press top left, MENU button
•
On menu screen, using middle down arrow button, press 2x or until you have
“Menu” highlighted, Press Ok
•
Press the bottom left down arrow button until “G - Sensor” is highlighted, Press
Ok and set to “LOW”, Press OK
•
Press the bottom left down arrow button until “Park Monitor” is highlighted
•
Press bottom left “OK” button to make sure Parking Monitor is OFF
You are now done with initial setup.
•
Press top left Menu button to get back to your main video mode.
•
Press bottom left “OK” button to start recording
Master Reset “hole button” is located on right side of camera-Using a safety pin,
thumbtack, toothpick, etc. Press inside hole for a master reset of 1440P dash
camera.