7
Adjustment instruction
Treadmill adjustment
1.Before connect power, service or professional inspect if voltage is suitable, and if
three-core plug grounded wire is connected. Using hand to pull the belt, inspect if rotation
is flexible and no noise.
2.Connect power, press Start key, treadmill will run slowly, inspect if belt and computer are
normal.
3.Press i/- key, inspect treadmill rotation and display. If the belt is deviation, you
must stop it to adjust belt according daily maintenance.
4.Pressing emergency stop key or pull out safety key on running treadmill, it will stop
immediately. Rotating the emergency stop key to reset or insert safety key, can restart
treadmill.
5.Press Stop key, the treadmill stop to running, waiting incline back to zero class, turn off
the power.
Treadmill can use after all the install adjustment is finished.
1.Two feet stand on two side of belt, put the other side clip from safety key to clip to clothes.
(see figure)
2.Press Start key, the treadmill will run slowly. You can step on belt slowly.
3.Press speed+ key, the belt speed will gradually increase, you can see the speed data
from computer, after run is suitable, you can let go
handrail to run.
4.When stop running, should gradually slow, and run
2-3 minutes in slow speed, put the heart and breathe
back to normal.
5.At the end of run, you can reduce belt speed to the
lowest, and the treadmill will stop when pressing stop
key.
6.If it is too late to reduce speed and lose balance
when high speed running, you can press and pat the
emergency key, treadmill will stop to run immediately.
Its stopped distance according to inertia and weight.
7.Please fully master emergency key and safety key
usage.
