7
STEP 9
Insert the PEDAL SHAFT (6) through the tube located on the BASE FRAME (3). Slide a PEDAL
CAP (19)onto each end of the PEDAL SHAFT(6). Then secure the PEDAL CAPS (19) with
BUTTON HEADBOLTS (M8x15mm)(60) and LARGE WASHERS(M8)(83) at both ends of the
PEDAL SHAFT (6).You need to use two Allen Wrenches to tighten the BUTTON HEAD BOLTS
(M8x15mm)(60) at both ends of the PEDAL SHAFT (6) at the same time.
83
60
19
83
60
6
19
3
Содержание Rower Active
Страница 1: ...Ed 09 17 Rev 00 INSTRUCTION...
Страница 16: ...15 102 Bearing 6003RS 4 103 Handlebar Sleeve 1 104 Rubber Pad 2...