TOORX Rower Active, Инструкция по эксплуатации

Страница: 12 / 17

11
Accumulates traini ng distance from 0.0 up to 99.9KM. Yon may also preset the target distance before training by
pressing “UP” and “DOWN” buttons. Each setting is 100 meter.
As soon as the target distance is achieved, value starts to count up immediately and the monitor starts to alarm for 8
seconds.
COUNT:
Accumulates total working count from 0 up to 9999. Yon may also preset the target count before training by pressing
“UP” and “DOWN” buttons. Each setting is 10 count
.
As soon as the target count is achieved, value starts to count up immediately and the monitor starts to alarm for 8
seconds.
CALORIE:
Accumulates calories
consumption during training from 0 up to 9999 kcal with each increment 0.1kcal. Yon may also
preset the target calorie before training by pressing “UP” and “DOWN” buttons. Each setting is 1 kcal increment.
As soon as the target calorie is achieved, value starts to count up immediately and the monitor starts to alarm for 8
seconds. (
This data is a rough guide for comparison of different exercise session which cannot be used as medical
treatment )
PULSE:
Your current pulse rate will be displayed on the LCD console whenever you wear of wireless chest belt (optional item ,
not include ) from 40 to 220.
If there
no heart rate signals been detected for 16 seconds, the monitor will shows “ P “
You can also set a target heart rate before training by pressing “UP” and “DOWN” buttons within the rate zone 90 to
220. Each setting is 10 heart beats.
If you go above this setup heart rate, the LCD Pulse value will FLASH and Alarm to ask you reduce the intensity of
your exercise.
The picture indicates the travel distance on the roller machine during exercise.
NOTE: Without any signal been transmitted into console for 4 minutes, the LCD display will shut off automatically and
all function data will reset to Zero. You many press any button or start training to have the console power on again.