cover (13) from main frame (1). Then attach to the upper upright post (6).
2.Connect motor communication wire (10) and console communication wire (9).
3.Attach the upright post (6) to the main frame(1) with flat washer(34),spring
washer(27),Allen
C.K.S.
full
thread
screw(35),
curved
washer(28),spring
washer(27),Allen C.K.S. half thread screw(35), Allen C.K.S. half thread screw(36)
,curved
washer(28) and Hex locking nut.(33)
4. Attach upright post cover(13) and Upright post trim strip (46) to the main frame (1).
Tip:
After connecting the communication line, it is necessary to plug the communication
wire into the upright post to avoid clipping the wire. Make sure that all screws are in the
hexagonal hole.
Step 6:
Attach handlebar connection wire(11) to the upright post(6). Attach handlebar(7) to the
upper upright post(6). Close handle clamp ring(22) and lock them with T-shaped rotary
knob(21).
6
13
1
9
10
46
28
27
34
27
35
34
27
35
28
27
35
36
28
33
28
35
