TOONG IN ELECTRONIC CORP.
Copyright © 2005. All rights reserved
24
FAQ
1. Q : How do I know that the battery of the headset have insufficient power?
A : The battery power is almost exhausted when one or more following
scenarios happen:
(1) The headset starts to reset automatically.
(2) You can constantly hear breaks on the audio link, or
(3) You cannot connect the headset to the TX/HCI dongle after several tries.
Please charge the battery to avoid these problems above.
2. Q : Why cannot I create a connection to the headset?
A :
(1) Verify that the battery power of headset is not running low.
(2) Check if the headset is powered on and the indicator LED is steadily light
on.
(3) Verify that the headset is within the specified range of 10 meters from the
audio source.
(4) Check if any other Bluetooth device has connected to the headset. If
headset is connected with other devices, the indicator LED on the
headset is flashing.
(5) Turn both the headset and the TX/HCI dongle device off. Power on the
headset on and then power on the TX/HCI dongle and try connecting
again.
3. Q : When I use Windows Media Player, the music is out from the PC
speakers instead of Bluetooth headset. What should I do?
A : If you set the TX/ HCI dongle to TX mode, you don’t need to change any
settings. Just keep the default setting. If you set the TX/HCI dongle to HCI
mode, you need to start “BlueSoleil” first than launch Windows Media Player.
If you can’t do it successfully, you need to change the Windows default audio
system as follows:
(1) Launch “Adjust Audio Properties” by right clicking the “volume icon” in the
lower right corner in your PC screen. Choose “Sounds and Multimedia
Properties ” >”Audio”. Select “ Bluelet Audio”.
