TOONG IN ELECTRONIC CORP.
Copyright © 2005. All rights reserved
9
*Note:
1. Some cell phones require that an explicit connection be established with
the headset. For example, Nokia 3650 requires a Bluetooth connection to
the headset be initiated and stay connected before proceeding further.
Other phones may initiate a Bluetooth connection only when a call is
received. Please refer to the user manual of the cell phone being used and
fully understand its behavior.
2. Some cell phones send the ring indication to the headset while others do
not. If your cell phone supports this feature, you should hear the ring tone
of your cell phone on the headset. Phones that do not support ring
indication will automatically accept the call.
4.Re-connecting
When the headset loses connection to Bluetooth enabled cell phone, you
need to repeat step 3 to re-connect it.
5.Turning Off
Turn off the headset by setting the power switch to “off”.
Enjoying the Superior Music Quality
Before using the headset to listen to music, you should make a music
connection as follows:
1. Setting Up Music Source
Set the Bluetooth TX/HCI dongle to TX mode. Then link it to the audio source.
The green LED indicator on TX/HCI dongle will flash quickly and search for
the headset.
2.Connecting Headset with TX / HCI dongle
(1) Turn on the headset. Meanwhile, you can hear the opening sound from
the headset.
(2) Pair your headset with TX / HCI dongle. Headset can be automatically
paired.
