On duty: 8:00-12:00 am for Saturday
The setting is following:
1. 4 settings shown as the figures. (below)
2. To select the setting number, press “+” to change it into 05, and press “AUTO/MAN” key, at the same
time “+” key for 3s to cancel other setting and make it display
“
--:--
”
.
3. continuously press ”MODE” key, and make it return to the clock state.
4. Press ”AUTO/MAN” key and make sure on the state of ” AUTO”.
5. Also make sure the “AUTO, OFF, ON” key on the state of “AUTO”
Remove the troublesome
Trouble Methods
No work, and
power indicator
(
red
)
is not on.
Maybe the connection is not good. Pls check the connection.
Power
indicator(red) is
on, but no work
1, No setting: Under the clock state, pls check whether there is flashing on the bell
mark, if not, it means there is no setting. Pls enter the setting now.
2, Error setting: Check every setting and make sure it is correct on time and week.
3. ON, AUTO, OFF state is not correct: Check the LCD display and the button on the
side face of this product and make sure both of them are at “auto” state.
Display not
clearly or no
display
1, No power on the battery: Pls change another new battery.
2, The temperature is too low: pls make its working temperature rise, it will be in
normal.
Ringing time is
not correct
1, Check the setting program, and make sure every setting time is correct. Pls
cancel the redundant program as “- -:- -” ( not 0:00)
Key failure or not
display.
1, This product may be caused by the serious electromagnetism anti-interference,
condition temperature or other reasons. Pls press reset key to reset.
Wiring
fuse
Notice: The load should exceed the stated capacity, make sure the polarity correct.