TOOLSPACE XW-1201, Руководство пользователя

Страница: 15 / 20

• Dangers caused by impossibility to stop the machine in best conditions, relate to solidity of
the handle and placing of motor shut down device.
• Dangers caused by defect of machine control system, relate to solidity of the handle, placing
of drivers and marking.
• Dangers caused by shooting up of subjects or splashing of liquids.
• Mechanical hazard, caused by cut and throw off.
• Noise risk resulting in loss of hearing (deafness) and other physiological disorders (e.g. loss
of balance, loss of consciousness).
• Vibration risk (resulting in vascular and neurological harm in the hand-arm system, for
WARNING!
The product produces an electromagnetic of a very weak intensity. This may
interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons
with pacemakers should consult the use with their physician and the manufacturer.
UNPACKING
• Carefully check all parts after unpacking the product from the box.
• Do not throw away packaging materials until you have not reviewed carefully if they did not
remain a part of the product.
• Parts of the packaging (plastic bags, paper clips, etc.) do not leave within reach of children,
could be a possible source of danger. There is a danger of swallowing or suffocating!
• If you notice transport damage or while unpacking, notify your supplier immediately. Do not
operate the product!
• We recommend save the package for future use. The packaging materials must still be
recycled or disposed of in compliance with the relevant legislation. Sort different parts of
the packaging according to material and hand it to the appropriate collection sites. For
further information contact your local administration.
Fasteners can become loose during transport in the packaging.
PACKAGE CONTENTS
1x cordless drill , 1x charger, shipping box, drill bit set, 1x instruction manual
• Standard accessories are subject to change without notice.
• The tool requires no assembly
COMMISSIONING
TO INSTALL AND TO REMOVE BATTERY PACK
1. Lock ON/OFF switch on your drill by placing the direction of rotation selector
7 )
in
center position.
2. Slide the battery pack onto the cordless drill/driver by pressing the buttons
2 )
on
both sides of the battery.
3. Do not use force when inserting the battery pack. If the battery does not slide in easily, it is
not being inserted correctly.