TOOLSPACE XW-1201, Руководство пользователя

Страница: 11 / 20

b. Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or remove the battery pack, if
detachable, from the power tool before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may affect the power
tool’s operation. If damaged, have the power tool repaired before use.
Many
accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those intended could result
in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
USE AND MAINTENANCE OF BATTERY TOOLS
a. Tools should only be charged with the charger by the manufacturer.
A charger that may be suitable for one type of battery pack could be a re hazard when
used with another battery pack.
b. The tool should only be used with a battery pack designed for the tool.
re risk.
c. When not in use, the battery pack must be protected from contact with other
metallic objects, such as paper clips, coins, keys, nails, screws, or other small metal
objects, which may cause connection of one battery contact with another.
Short-
circuit of the battery contacts can cause bur re.
d. Liquid may leak from the battery if used improperly; contact with them should be
avoided. If accidental contact with such liquids occurs, the affected area should
be rinsed throughly with water. In addition, medical attention should be sought
immediately if liquid enters the eye.
Liquids leaking from the battery can cause
rns.
e. A damaged or rebuilt battery pack or tool must not be used.
Damaged or
batteries may exhibit unpredictable behaviour that could result in re, explosion, or personal
injury.
f. Battery packs or tools must not be exposed to re or excessive heat. Exposure to re
or temperatures above 130 °C may cause an explosion.
g. Follow all charging instructions and do not charge the battery pack or tool outside
the temperature range in the instruction manual.
Improper charging or
charging at temperatures outside the range may damage the battery and increase
re.