OPERATING INSTRUCTIONS
To measure an angle
, begin by pressing the
ON/OFF
button to power the DAF on.
Then fold the measuring arm into the base arm and press the
ZERO
button to set
the angle between them to zero; the LCD will respond by displaying
000.0º
.
Place the bottom of the DAF’s base arm against one side or leg of the structure
whose angle you wish to measure, and the top of the DAF’s measuring arm against
the other side or leg. The LCD will display the angle between the two sides or legs.
In practice, the height of the DAF prevents it from measuring angles less than 13º.
To use the DAF with your phone,
begin by downloading the ToolSmart
™
app
from the iTunes Store or Google Play Store and installing it. Then, pair the DAF and
your phone by activating Bluetooth on your phone and pressing the
button on the
DAF.
A tutorial on the app explains how to save DAF measurements to your phone and
overlay them on photos of your project taken by the phone’s camera.
WARRANTY INFORMATION
General warrants its instruments and accessories, and digital tools products against
defects in material or workmanship for one year from the date of purchase unless
otherwise stated on the packaging, manual, and/or marketing materials. General
also warrants its non-digital tools products against defects in material or
workmanship on a limited lifetime term.
General will replace or repair the defective unit, at its option, subject to verification
of the defect.
This warranty does not apply to defects resulting from abuse, neglect, accident,
unauthorized repair, alteration, or unreasonable use of the product. It also does not
cover products purchased from unauthorized distributors. A proof of purchase must
accompany each warranty claim.
For more details or to file a warranty claim, contact General Tools & Instruments
Technical Support at [email protected].
4
