Toolshop 208-2136, Руководство оператора

Страница: 10 / 14

10
Actuating tool
Warning: To reduce the risk of injury, Always wear proper eye and hearing protection when operating this
tool.
Warning: A nail will fire each time the trigger is depressed as long as the contact trip remains depressed
which could result in inadvertent actuation.
1.
Depress the contact trip firmly against the work surface.
2. Depress the trigger.
Clearing a jammed nail
Warning:
Disconnect air line from tool and remove fasteners from
magazine before making adjustments or personal injury may result.
If a nail becomes jammed in the nosepiece, keep the tool pointed
away from you and follow these instructions to clear:
1.
Disconnect air supply from tool.
2. Press magazine lock to release movable magazine.
3. Push down jam clearing latch then pull up to open front plate.
4. Remove jammed nail, using pliers if necessary.
5. If the piston assembly is in the down position, insert screwdriver or other rod into nosepiece and push
the piston back in position.
6. Remove rod and close front plate.
7. Lift latch to secure front plate to nosepiece.
8. Make sure the trigger and contact trip move freely without sticking or binding.
9. Loading nails into magazine (see loading the fasteners section before).
10. Reattach air supply.