8
4. Press “SET” to store the new value and move to the following parameter. To exit:
Press SET + UP or wait 15s without pressing a key. NOTE: the set value is stored even
when the procedure is exited by waiting the time-out to expire.
For more info, please refer to the controller manual
MAINTENANCE
CLEANING
For health standards and good quality of beverages or foods, clean interiors of the unit as
often as possible.
CAUTION
:
Do not clean the unit by means of a water jet or pressurized washer.
1.
Before carrying out cleaning, turn the unit off and remove the power plug.
2.
Do not use abrasive powders that might damage the interior parts of the showcase.
3.
Use neutral soap and warm water to wash the interiors. Rinse carefully with water to
remove any soap residues.
4.
To maintain a high standard of working performance, leave the unit turned on during
the night and day to avoid deposits.
CAUTION
:
Do not use any damaging solvents (petrol, alcohol, etc.) for cleaning the unit.
The unit may get damaged. Do not use and sharp objects for cleaning. The unit may be
cleaned with a damp towel but should never directly come in contact with water. After
cleaning the unit, make sure all parts are dried completely.
INSTRUCTIONS FOR DISPOSAL
When replacing your old unit with a new one, comply with the following information:
Old units are not to be disposed of as regular waste. Valuable raw materials can be
obtained by recycling old units.
Render your old unit unusable:
Cut off and remove the main power plug from the unit, then discard separately.
CAUTION: Substances and gases in the thermal insulation must be disposed of
professionally. Ensure that refrigeration tubing is not damaged prior to disposal. Please
discard the unit according to the regulations of local law.
Содержание DZW-1200
Страница 11: ...11...
Страница 13: ...13 CIRCUIT DIAGRAM...