@
ToolkitRC
2019
37
6. Manually calibrate the voltage.
Connect the power to the input port. When in the
logo interface. press the [Exit] button once.. The
system will enter the manual calibration voltage
function. Use a voltmeter to measure the actual
voltage of each battery. move the cursor to the
corresponding voltage value. and modify the
voltage value to match the voltmeter value for
calibration. After the calibration is completed. move
the cursor to save. short press once. the buzzer
sounds once and the save is successful. Exit or Turn
off device
7. Supplement
When the lithium battery is fully charged. the
prompt "fast charging has ended" .If the battery is
not removed. constant voltage trickle charging will
be performed automatically to bring the battery to
the even more full state.
