@
ToolkitRC
2019
28
Auto 1. Auto 2. Auto 3.
When the mode is set to manual. you can move the
cursor to the pulse width and period items to set the
signal value to be output.
When set to Auto 1. 2. 3. the pulse width value of the
output PWM will automatically change at 3 different
speeds.
Pulse width can be set from 800 to 2200us The cycle
can be set from 2.5ms (400Hz) to 50.0ms (20Hz).
Press [up] or [down] on the output main interface to
move the cursor to the [PPM] item. press [OK] to
enter the PPM output interface as shown below.
Press [up] or [down] to move the cursor to the
value that needs to be modified. Press [OK] to
modify the output pulse width value of this channel.
Press up or down under the output main interface to
move the cursor to the [SBUS] item. press [OK] to
enter the compatible signal output of SBus. Dbus.
