Tool-Temp TT-188, Руководство по инструкции

Страница: 24 / 45

Manual of instructions TT-188 24/37
P30 Temperature
at 20 mA INPUT 400.0°C / 752°F
(-
49.9…400.0°C)
(-
57.8…752.0°F)
Upper scaling point of the voltage
analog input
20 mA corresponds to 400°C
P31 Temperature
at 0 V OUTPUT 0.0°C / 32.0°F
(-
50.0…399.9°C)
(-
58.0…751.8°F)
Lower scaling point of the voltage
analog output
0 V corresponds to 0°C
P32 Temperature
at 10 V OUTPUT 400.0°C / 752°F
(-
49.9…400.0°C)
(-
57.8…752.0°F)
Upper scaling point of the voltage
analog output
10 V corresponds to 400°C
P45 Verhältnis zwischen Kühl-
und Heiz-leistung 0
(1...50)
Anpassung der Kühlleistung
0:
2-Punkt Kühlung (Standard)
1: Kühlleistung maximal
50: Kühlleistung minimal
P53 Flow unit 0: Flow OFF
1: Impulse (Hz)
2: litres/min
3: US gallons/min
4: Imperial gallons/min
Flow unit to display
1 US gallon = 3.785 litres
1 Imperial gallon = 4.546 litres
P60 Flow measurement
Calibration table
0 = Manual
1 = Small units 1
2 = Medium units
3 = Large units
4 = Reserved
5 = Small units 2
6 = Reserve
Selection of the calibration table for
flow measurement
Navigation in the controller
Enter into the controller and navigate to the different parameter:
•
To enter into the programme of the controller, the program button has to be pressed
for 3 seconds.
•
To move from parameter to parameter, press the programme button.
Setting the parameter value:
With the two arrow buttons the value of the parameters can be adjusted.
Save the parameter settings:
•
To save the parameter settings and get back to the control function, the flow button
must be pressed.
•
To save the parameter settings and move to the next parameter, the programme
button must be pressed.