TONI TMS210F, Инструкция пользователя

Страница: 6 / 19

!
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
!
WARNING: This appliance is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless they
have been given supervision or instruction concerning use of the machine by a person
responsible for their safety. Children must be supervised to ensure that they do not play
with the machine.
Save all warnings and instructions for future reference.
Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or
fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.

Make the workshop childproof. Use padlocks, master switches. Always remove starter keys.

Never leave a power tool running while it is unattended. Turn the power switch OFF and do
not leave the area until the tool has come to a complete stop.
Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators.
There is an increased risk of electric shock if your body is earthed or
grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.

Do not abuse the cord. Never use the cord for pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of a ground fault circuit interrupter (GFCI) reduces the risk
of electric shock.
Personal safety

Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating power tools may result in serious
personal injury.

Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.

Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source, picking up or carrying the tool. Carrying power tools with your finger on
the switch or energizing power tools that have the switch ON invites accidents.
GENERAL SAFETY WARNINGS
6