TH2689/89A Operation manual
22
Figure 3-20 charge time high limit setup
Move cursor to “ChgTd
：
50S”
，
operate according to the table below
：
Coarse turning. Stepper is +30Sec
；
Coarse turning. Stepper is -30Sec
；
Fine turning. Stepper is +5Sec
；
Fine turning. Stepper is -5Sec
；
Numeric key
Input W.V charge current value directly, press ENTER to
confirm
3.2.6.4 <W.V. TEST> notes
The correct method of cancelling test
：
when the instrument is in the status
of discharge, the DUT can be connected on and off.
Press
, the instrument is in the status of
discharge, now the DUT can be connected off
；
when the
DUT is connected, the instrument should be in the status
of discharge .
