16
delete it in this window by clicking on the
trash bin and selecting the recipe(s) you no
longer need.
4.4.2 CREATING SETS
You can compose a set of recipes by clicking
on each button of the four square buttons
and choosing a recipe from the list.
Once you have made your selection
of recipes, press “save set”, choose a
meaningful name and select the desired
category. Press then save again.
Then press “select set” and select the
desired set in the corresponding category.
If you press “edit set” you can change one
specific set or delete it if no more needed.
4.4.3 ADVANCED
The Advanced tab provides you a very
intuitive and comprehensive tool for the
creation of new recipes. You can set the
temperature of each extraction phase
(bloom, turbulence, development) and
define the characteristics of the water pulses
(quantity, flow ratio, duration, interval).
First of all, you should set the water target
which you would like to produce. This
value will not be exceeded. Varying the
bloom or the turbulence phase will adapt
the development phase automatically. The
development phase itself is self-adjusting
between duration and flow ratio of its pulses.
Second, you can define how much coffee
you need for your recipe by specifying the
brew ratio. The amount of coffee is indicated
in small letters below. In the same place, you
will also see a recommendation of how much
water is needed for the blooming phase (this
can be transferred to the blooming column
if required).
EDIT RECIPES
