Tone NITRO, Руководство пользователя, Страница: 9 / 43

Page 6 of 39
2.3 Operating overpressure
Some components are under overpressure during operation and are therefore a potential source
of danger. Do not loosen or dismantle any parts that are under excess operating pressure.
2.4 Danger due to operational cooling
The evaporation temperature in the coolant circuit can be as low as -10°C. There is therefore a
potential source of danger if maintenance, servicing, cleaning etc. are carried out on components
at the appropriate temperature without suitable protective measures.
2.5 Danger due to operational heating up
Do not touch the compressor, condenser, motors and piping, as these parts can heat up during
operation, which may cause injury if touched.
2.6 Danger from sheet edges
There is a residual risk of injury at sheet edges and corners despite constructive prevention.