Tone NITRO, Руководство пользователя

Страница: 30 / 43

Page 27 of 39
System only emits air.
Are there air bubbles in the suction hose?
Yes! No!
System sucks in air.
Check NITRO setting.
Is the connector
plugged in flush?
Is the canister /
bag-in-box
empty?
Is the suction
hose damaged?
Is the O-ring in
the screw
connection of the
suction hose
present / OK?
Is the NITRO setting
too high ?
No! Yes! Yes! No! Yes!
Attach the
connector flush. Fill canister /
exchange bag-in-
box. Replace suction
hose.
Insert or replace
the transparent O-
ring / seal.
There is one
piece as
replacement in
the scope of
delivery.
Turn the left-hand dial
NITRO settings back (to
the left/ counter-
clockwise).
See "Adjusting the
foaming with NITRO
EASY CONTROL
”.
System dispenses drink only without foaming.
Is the system set to PUR?
Is the NITRO setting not turned
up enough ?
Is the beverage liquid able to
foam?
Yes! Yes! No!
Set system to NITRO.
See "Adjusting the foaming
with NITRO EASY CONTROL
”.
Turn the left-hand dial NITRO
settings back (to the right/
clockwise).
See "Adjusting the foaming
with NITRO EASY CONTROL
”.
Dry clean the system and use
other beverage liquid. Too little
protein or sugar, or too much
alcohol can prevent proper
foaming.
System dispenses drink too warm.
Is the cooling switched
on?
Does the system have
enough space? Are all
ventilation slots free and
the condenser not
covered?
Does the outside
temperature or the
temperature of the
beverage to be drawn in
the bag-in-box/ Nitro
DP® canister exceed
22 °C?
Is the system exposed to
direct sunlight?
No! No! Yes! Yes!
Switch on cooling. To do
this, turn the right-hand
knob to the right. It is essential that all
ventilation slots are kept
clear. And switch off the
system for 10 minutes.
The condenser fins must
never be covered,
otherwise there is a risk
of overheating and fire
and/or the unit could be
destroyed! It's too hot. The system
must "fight" against the
outside temperatures or
cool down the too warm
beverage liquid first.
Have patience, the filing
system just needs a little
more time. Always remove the
system from the sun and
place it in a shady place.
The system must "fight"
against the high outside
temperatures or cool
down the too warm drink
first. Have patience, the
filing system just needs
a little more time.