Tone NITRO, Руководство пользователя, Страница: 15 / 43

Page 12 of 39
5.1.2 First time installation
1
Place TONE Nitro [A] in its place.
Note : Keep ventilation and exhaust air slots free
and do not block them under any circumstances!
When first installed at a new location,
the
machine must be left standing quietly for at
least 30 minutes before use
.
2
Insert perlator-unit [B] into mixer housing [C] .
Note : Watch out for O-rings! Before inserting, it
is essential to remove the plugs.
3
Screw tap unit [D] onto the external thread of
the mixer housing [C] and tighten slightly.
Note : Under no circumstances should pliers be
used for tightening!
4
Set device switch [E1] on the rear panel to
"0 OFF".
5
Screw the suction hose with screw connection
[F1] to the rear opening [G] . Plug the cable [H]
of the cold appliance into the socket [E2]
provided for this purpose.
Note : Clean the suction hose with screw
connection [F1 ] and the rear opening [G] with
disinfection spray before use.
A
B
C
D
E1
H
V
H
E2
F1
G