Tone GX361ZA-UC, Инструкция по эксплуатации

Страница: 20 / 28

- 19 -
(2) Remove inner socket from outer socket by pushing projecting pin using
screwdriver or TC bolt (Figure 9).
(Figure 9)
● Projecting pin is a doughnut-shaped pin in the inner socket.
(3) Select adequate inner & outer socket assembly of the bolts being tightened.
i.e. Use TONE genuine M36 inner & outer socket assembly for tightening
M36 TC bolt/nut assembly.
(4) Place the inner socket vertically then slide the outer socket over the inner
socket. Push projecting pin down using screwdriver or pintail of the TC bolt
and inner & outer socket will be properly assembled (Figure 10).
(Figure 10)