Tone GX361ZA-UC, Инструкция по эксплуатации

Страница: 23 / 28

- 22 -
(6) Carbon brush must be regularly inspected and replaced with the new genuine
carbon brush when brush length becomes less than 6mm (Figure 12).
*Carbon brushes are placed in two positions.
*Indicate the wrench model when carbon brushes are needed because carbon brush differs
from model to model.
(Figure 12)
(7) Replace carbon brush as shown in the following figure 13.
(Figure 13)
(8) Overhaul must be carried out every 6 months or 30,000 tightening, whichever
comes first. Contact your distributor for overhaul.