15
▪
Check and clean each sprayhead daily. All
sprayhead holes must always remain open.
▪
Never immerse the appliance itself, the
power supply cable or plug in water.
▪
Never attempt to touch or pick up and
electrical appliance if it has fallen into water.
In this case, disconnect the plug from the
socket immediately.
▪
Check the appliance and cable regularly
for damage.
DANGER due to
unauthorised repair!
Repairs should be carried out
only by authorised customer
service centres.
▪
If you cannot correct a fault with the aid
of the steps described in these operating
instructions, please refer to your authorised
dealer.
NOTE
-
Any remains on the sprayhead may
infl uence the water fl ow and impact your
coffee brewing.
5.2 DAILY CLEANING
▪
Place a fresh fi lter into brew basket and
add appropriate amount of sanitizer.
▪
Place thermal server in place and initiate a
brew cycle to fi ll dispenser.
▪
After cycle has fi nished, allow to sit for
several minutes.
▪
Draw cups of cleaner through dispenser to
ensure cleaner reaches all parts of dispenser.
▪
Rinse the brew basket and thermal serv-
er with fresh water, again drawing water
through dispenser.
▪
Discard any remaining water and you are
ready to brew.
5.3 DESCALING
To guarantee proper functionality of TONE
equipment it is necessary to descale the de-
vice each year, independent of using a water
softener. TONE Kaffeemaschinen AG rec-
ommend to execute the fi rst descaling after
one year after installation.
Descaling of TONE equipment only by qual-
ifi ed personnel.
To descale your TONE equipment, please
contact a local Technical Service that has
been authorized by the manufacturer.
6. FAULT RECTIFICATION
PROBLEM
TIP
Descale
Please contact
a local Technical
Service that has
been authorized by
the manufacturer.
While coffee is
brewing, water
drips from the cold
dilution outlet.
The pressure
is too high, a
pressure regulator
is required please
contact the
technical service