16
1.
Back button. This button returns the map to an overview of your whole route or, if no route is
planned, moves the map to put your current location at the center.
2.
Switch view button. Select the switch view button to change between the map view and the
guidance view.
When in map view, if you are driving, the small compass arrow rotates to show your current
driving direction, with north being up.
Tip
: The compass direction you are driving is shown in the switch view button below the small
compass arrow, for example, NE for North East. These compass directions automatically
appear when driving in North America and disappear if you leave North America.
3.
Zoom buttons. Select the zoom buttons to zoom in and out.
4.
Current location. This symbol shows your current location. Select it to add it to My Places or
search near your current location.
Note
: If your GO cannot find your location using GPS or other methods, the symbol appears
gray.
5.
Selected location. Press and hold to
select a location
on the map. Select the pop-up menu
button to show options for the location, or select the drive button to plan a route to the loca-
tion.
6.
Main Menu button. Select the button to open the Main Menu.
7.
Map symbols. Symbols are used on the map to show your destination and your saved places:
Your destination.
Your home location. You can set your home location in
My Places
.
A
stop
on your route.
A location saved in
My Places
.
Select a map symbol to open the pop-up menu, then select the menu button to see a list of
actions you can take.
8.
Traffic information. Select the traffic incident to display information about the
traffic delay
.
9.
Your route, if you have
planned a route
. Select the route to clear it, change the route type, add
a stop or save changes to your route.
10.
Safety cameras on your route. Select a
safety camera
to display information about that camera.
11.
Route bar. The
route bar
is shown when you have planned a route.
The guidance view
The guidance view is used to guide you along the route to your destination. The guidance view is
shown when you start driving. You see your current location and details along your route, including
3D buildings in some cities.
Note
: 3D buildings in guidance view are not available on all GO devices.
The guidance view is normally in 3D. To show a 2D map with the map moving in your direction of
travel, change the
2D and 3D default settings
.
