Tomberlin 2010 E-Merge, Руководство по обслуживанию

Страница: 16 / 151

Overview
MERGE 1-7
Chapter 1
Tightening Torque
Tighten the bolts, nuts or screws pursuant to the
instructions on the torque in each chapter.
Parts Replacement
We recommend that you use E-MERGE original parts for
all replaceable parts. Use the oil or grease
recommended by TOMBERLIN during the assembly,
inspection and repair.
Washer, Grease Fitting and O-ring
During the inspection and repair of vehicles, all the
washers, grease fittings and O-rings removed should be
cleaned up before being mounted.
Bearing and Oil Seal
During the mounting of bearing and oil seals on which
the manufacturer’s mark and number are present, the
mark and number should face outwards for easy
identification. All the bearing and oil seals, once removed,
must be replaced with new ones. To apply the oil seal,
cover a thin layer of light lithium grease over the oil seal.
While mounting the bearing, the lubricants should be
fully applied.
Recommendations on Disassembly and Assembly
Follow the following recommendations to remove and
mount the parts:
• Whenever the parts are disassembled, they must be
cleaned and air dried.
• Apply the lubricant oil over the surface of the parts that
are to be mounted.
• After the mounting of all parts in place, verify that all
movable parts are in normal operation.
Original