Tomberlin 2010 E-Merge, Руководство по обслуживанию

Страница: 81 / 151

Electric Component
MERGE 9-9
Chapter 9
Forward/Reverse gear switch is on REVERSE
position, the reverse buzzer should sound a
warning tone.
• When Forward/Reverse gear switch is on
NEUTRAL position, make sure the electric
vehicle remains still.
Charger receptacle removal
1. Take out the key from the key switch.
2. Apply the parking brake.
3. Disconnect the battery cable according to the
directions.
Please refer to Chapter 1 “Protection for Electrical
Safety”.
4. Remove the red wire and the black wire from the
positive binding post on the rear of charger
receptacle.
5. Screw off the 4 screws fixing the charger
receptacle plate to the socket bottom and the car
body.
6. Remove the charger receptacle retaining plate
and charger receptacle.
7. Check:
Check the receptacle for cracks, poor contact and
wear and replace the part if necessary.
Charger receptacle installation
Back to the removal steps
Battery removal
1. Take out the key from the key switch.
2. Apply the parking brake.
3. Remove the seat pad assembly.