7
• Residual Heat:
If the temperature of the cooking zone is still high (over
50°) after it has been switched off, the relative display will
indicate the symbol (residual heat). The symbol will
only switch off when the burn risk in no longer present.
• Quick heating / Booster function
(
Induction
zone):
Switching a single cooking zone OFF:
A single cooking zone can be switched OFF by directly
selecting cooking level “0”or through sliding down to“0”.
If a cooking zone is switched OFF but still hot the accor-
ding display will show “H”.
All inductive cooking zones have a booster function.
If the booster is activated the generator provides a
maximum power than to a cooking zone 3700W. The
booster function allows the user to heat up the food extr-
emely fast and hence can help to save time.
Booster function can be activated by pressing booster
funtion key and display show P. (Press
key to
active the Booster Function).
The booster function of each cooking zone can be activ-
ated for a limited time of 10 minutes. After time out, the
cooking zone return to level 9.
To cancel the booster function by change the power
level or turn off the cooking zone.
•
Warming function:
By press
F
key
The warming function is used to keep cooked food warm.
Therefor the selected cooking zone is operated with a
low power output. If the warming function is activated
the according display shows
U.
Warming function supp-
ort for 3 levels of warming degree (40oC, 70oC and 90oC)
that correspondly with 3 illuminated leds.
To end the warming function by:
-press the warm key again or
-changing the power level by sliding the finger on slider bar.
C
•
Heat up time automatic
The heat up time automatic function is a smart and very
useful for user to make well-done dishes.
The heat up time automatic can be activated for any coo-
king level from 1 -8 but not for special functions like boost-
er or warming function.
Activation:
Choose the required continuous cooking level and
hold it for 2,5 seconds ( for example: level 3 selected).
The heat up time automatically activated and will be
displayed alternately between “A“ and the selected contin-
uous cooking level( “3” ) on the 7-segment display.
To cancel the heat up time automatic function by changi-
ng the power level orturn off the cooking zone.
•
Pause function (
Select H
key
)
Pause function allows temporary pausing of the cook-
ing process, allowing the users to answer the door or the
telephone without worrying that the water is boiling over.
This function is also useful to clean the user interface sur-
face without changing the cooking set up.
Activating the Pause function:
When at least one cooking zone is in operation, the hob
may be switched to standby bypress the Pause key for 1s.
-Displays show and Pause indicator light on.
The pause mode can only be active for maximum 10 min.
If the pause mode is not deactivated within 10min the
control switches off automatically. During the pause pro-
cess, the ON/OFF button can be used to switch the
control off. In this case the pause mode is also deactivated.
Deactivating the pause mode:
In order to deactivate the pause mode by:
- Press the pause button again and
- Within in 10 sec, slide finger on the right cooking zone’s
sliderbar from right to left (slide from low to higher levels) to
deactivate the Pause.
•
Operating the timer
1. Basics
The timer modulecontains up to 3timers. 2timer which can
be assigned for the cooking zones and 1 independent
timer called “egg-timer”. The three 7-segment displays
show the remaining time until thealarm is activated. All tim-
ers work as count down timers. The operation range is bet-
ween 1 min to 1h 59min. For remaining times less than
9 min 59sec the display is exact to the second.
Before activating a timer the control has to be switched on.
Switching the control off deactivates cooking zone related t
imers.
The “egg timer”stays active after switching the control off.
2. Activating Cooking Zone Timer
A Timer can be activated for each active cooking zone.
After selecting the timer by press simultaneously 2 timer+
and timer–keys( first time),the cooking zone( left zone)
Timer is selected and related luminous symbol is fully lighted.
The timer display shows “0.00”.
For the following 10 sec it is now possible to assign
a timer value to the active cooking zone. After 10sec wit-
hout input the timer function is deactivate and the display
is switched off again.
By pressing simultaneously timer+ and timer-keys again
( second time)(as long as no value was set),the right cook-
ing zoneTimer can be selected and related luminous symbol
is fully lighted.While the symbol of left cooking zone Timer
is half lighted. By pressing simultaneously timer+ and timer-
keys again( third time) (as long as no value was set), the
egg timer can be selectedand related luminous symbol is f
ully lighted.
Egg timer work as a count down timer for alarm purpose.
3. Setting a timer value
Pressing the Timer+keys,a timer value can be set. If the
Timer+ key is pressed first the display starts with 1min and
can beincreased in 1min steps. Pressing and hold the
keys permanently fastens up the timer adjustment. The
speed will also increase while the key is held.
T
i
me
sett
ing
T
i
me
Di
s
p
lay
1min – 9min 59sec
9.59 ( 9 minutes 59 seconds)
10 – 59min
0.59 ( 0 hour 59 minutes)
1h – 1.59h
1.59 ( 1 hours 59 minutes)
4 Expiration of timer / timer alarm and acknowledgement
If a timer has expired the timer alarm is activated and the
assigned cooking zone is immediately switched off.
The cooking zone display shows “0“or “H“ and also the
bargraph indicates a hot surface if necessary.
